- Dual DigiTHERM
- Specifications
- Photos
- Highlights
Dual DigiTHERM
Using two thermal head sensors, Dual DigiTHERM is able to boost the swath width to 1240 pixel. With a thermal resolution of 0.005K, the standard temperature range is -40°C to 120°C. The two uncooled microbolometer FPA-detectors deliver brilliant thermal images in high quality. Using a graphical user inferface with real time preview, no additional video system is required. Both featuring rugged metal housings and being part of IGI's Modular Sensor Systems, DigiTHERM and DigiCAM are extremely robust and can be exchanged conveniently and inexpensively during airborne missions. Combined with IGIplan, CCNS4 and AEROcontrol GPS/IMU system, Dual DigiTHERM forms a complete solution for an extremely rapid and automated workflow for the generation of directly georeferenced thermal images.
Modular Sensor Concept
Dual DigiTHERM is one part of IGI's Modular Sensor Systems. Its components consist of two thermal cameras, two DigiControl SMUs with hot swap storage unit for up to 36 hours of flying time and an 8 inch TFT touch-screen. Using the same components as DigiCAM and Dual DigiCAM the changeover between the two systems is realised within minutes.
Complete Solution:
IGI offers a complete solution for a modern digital thermal camera system.
Components are:
- Mission Planning Software
- Aircraft Guidance & Sensor Management
- GPS/IMU System for direct georeferencing
- Image analysis software
Applications:
-
Capture loss of heat in:
Populated areas
Industrial plants
Pipelines and power lines
- Reduce CO2 emissions
- Flow measurement of streams and rivers
- Forrest fire warning system
- Monitoring volcanos
- Animal tracking
- Search and rescue operations
- Support of all LiDAR applications
Dual DigiTHERM example:
|
|
Specifications Dual DigiTHERM:
| Detector | Uncooled microbolometer FPA-detector (Focal Plane Array) |
| Resolution (two sensor heads) |
1240 x 480 pixels |
| Spectral range | 7.5 ... 14 µm |
| Pixelsize | 25 µm |
| Size of sensor head | 16 x 12 mm |
| Standard temperature range | -40°C to 120°C |
| Temperature resolution | NETD < 50 mK |
| Measurement accuracy | +/- 1.5 K (0°C ... 100°C) otherwise +/- 2 K |
| Colours | 16 bit dynamic range |
| Frame rate | 60 Hz |
| Image storing rate | 6 Hz |
| IP rating | IP65 conform, rugged lightweight metal housing |
| Operating temperature | -15°C to 50°C |
| Storing temperature | -40°C to 70°C |
|
Dimensions (one sensor head) |
153 mm x 91 mm x 111 mm |
|
Weight (one sensor head) |
1050 g |
Available lenses for the Dual DigiTHERM are:
| Wide angle lens: | |
| 1.0 / 12.5 mm | FOV 65° x 51° |
| Standard lens: | |
| 1.0 / 30 mm | FOV 30° x 23° |
| Telephoto lenses: | |
| 1.0 / 50 mm | FOV 18° x 14° |
| 1.0 / 75 mm | FOV 12° x 9.1° |
DigiTHERM product photos:
8 inch TFT touch-screen, DigiControl SMU, camera head
|
Dual DigiTHERM in GSM3000
|
|
Dual DigiTHERM in GSM3000
|
Dual DigiTHERM bottom-up-view
|
DigiTHERM touch-screen
|
Highlights:
- 2 Uncooled microbolometer FPA-detector (Focal Plane Array) with 1240 x 480 pixels
- 16 bit dynamic range colours
- IP65 conform
- Pilot-only missions possible
- Automated workflow
- Automated release of exposures at pre-planned positions
- Graphical User Interface with real time previews
- Automatic temperature calibration
- Compliance with a pre-defined overlap
- Easily interchangeable with DigiCAM and Dual DigiCAM
- IGI provides adapters for camera mounts
- Mounting together with LiteMapper LiDAR system and DigiCAM digital aerial camera system